Oakite® Aluminum Cleaner 164
Inhibited alkaline compound for cleaning aluminum by tank immersion.
Oakite Aluminum Cleaner 164 is an inhibited alkaline compound containing silicates. It’s for heavy duty tank cleaning of aluminum castings, forgings, extrusions, etc., and for cleaning aluminum sheet prior to anodizing, deoxidizing and prepaint treatments.
Besides aluminum, the detergent can be used for cleaning steel, stainless steel, copper, zinc, brass and aluminum.
The specially formulated material removes a variety of identification inks as well as shop soils like grease and oil. It is also used for cleaning aluminum equipment in food plants, oil refineries, chemical plants and other industries. With controlled foaming, Aluminum Cleaner 164 is suitable for use in air agitated tanks. It rinses freely.
Oakite Aluminum Cleaner 164 is also authorized by the USDA for use in federally inspected meat and poultry plants.
CHEMICAL CHARACTERISTICS
chemical composition ........................................... blend of alkaline salts (including silicates) and
surfactants
physical form ......................................................... as received: white powder as used: milky
solution
odor..................................................................... mild
bulk density.......................................................... 1050 g/L (8.8 Ib/gal)
hygroscopic tendency........................................... slight
foaming tendency.................................................. slight when circulated; high when sprayed
recommended diluent ........................................... water
maximum solubility ............................................. 30 g/L at 21 °C; 180 g/L at 82°C (4 oz/gal at
70°F; 24 oz/gal at 180°F)
behavior in hard water............................................ sequesters
rinsability............................................................. good
biodegradable surfactants ..................................... no
phosphate-free ..................................................... no
normal working concentrations ............................. 45 to 75 g/L (6 to 10 oz/gal) of water
normal operating temperatures ............................... 49° to 82°C (120° to 180°F)
effect of prolonged boiling ...................................... none
pH at working concentrations ................................. 11.5 to 12.5 at 21 °C (70°F)
effect of working solutions on metals........................ rate of metal loss from one-hour immersion in
Oakite Aluminum Cleaner 164, at 60 g/L
(8 oz/gal), 82°C (180°F), projected for one year is as follows
|
metal (alloy)
|
mm/yr
|
in/yr
|
|
aluminum (1100)
|
0.00
|
0.000
|
|
aluminum (2024)
|
0.00
|
0.000
|
|
steel
|
0.00
|
0.000
|
|
stainless steel
|
0.00
|
0.000
|
|
magnesium
|
0.00
|
0.000
|
|
brass
|
0.03
|
0.001
|
|
zinc
|
0.03
|
0.001
|
|
copper
|
0.05
|
0.002
|
APPLlCATlON PROCEDURE
Preparing Solutions: Add the total required quantity of Oakite Aluminum Cleaner 164 to half the volume of water, cold, while stirring and heat to about 82°C (1 80°F). Then, add the remaining half of water and adjust solution to operating temperature.
Oakite Aluminum Cleaner 164 is normally used at a 45 to 75 g/L (6 to 10 oz/gal) of water and in the temperature range of 49° to 82°C (120° to 180°F). It may be used in air-agitated tanks without foaming excessively.
Solution Control: Concentrations are titrated using Gardotest Procedure 92 or Gardotest Procedure 123.
For concentrations use Gardotest Procedure 92.
Sample Size: 25 mls Factor: 1.0
For free or total alkali use Gardotest Procedure 123. (See Procedure)
EQUIPMENT
The Chemetall Oakite Electrodeless Conductivity/Concentration Control System and Chemical Metering Pump can be used to monitor and automatically maintain the concentration of this product using conductivity. Please contact the Chemetall Oakite Process Equipment and Engineering Department for specific recommendations.
SAFETY AND HANDLING
Prior to handling and use of Oakite Aluminum Cleaner 164 the Material Safety Data Sheet should be read and understood by all personnel in contact with the product.
KEEP OUT OF REACH OF CHILDREN