Tech Cool® 35052 is a heavy-duty, bio-resistant premium grade semi-synthetic metal working fluid designed for machining and grinding. Tech Cool 35052 is specifically formulated for those facilities machining aluminum, titanium, inconel and other difficult to machine alloys. Tech Cool 35052 is formulated to provide protection against the growth of bacteria without the use of biocides, DCHA or other secondary amines.
Tech Cool 35052 is exempt under Rule 1144 of the SCAQMD since flashpoint is > 200º F.
Chemical composition ...................petroleum based with extreme pressure additives
Physical form...................................amber liquid
Odor..................................................mild, pleasant
Bulk density.................................... 8.60 lbs/gallon
Water solubility ...............................emulsifies
Foaming tendency ..........................low
pH at working concentration ......... 9.3
APPLICATION
Tech Cool 35052 is used for grinding and general machining operations. It is to be mixed directly with water at the following concentrations:
Grinding 4% to 6%
Machining 5% to 12%
Tech Cool 35052 is safe for use on aluminum and aluminum alloys; stainless steels, inconels, hastalloy, and other ferrous alloys. It is also ideal for use on 356 and 380 series cast aluminum. Ideal for reaming, sawing, tapping, turning, ID and OD grinding or similar operations.
SOLUTION CONTROL
Refractometer Readings - Tech Cool 35052 can be measured using a handheld refractometer (0-30
Brix). Refractometer factor = 1.0
Titration is also an option although Refractometering is really most ideal and accurate. Please contact us directly for titration instructions.
BENEFITS
• Low foaming, suitable for high speed machining
• Excellent emulsion stability
• Hard water stable (to 1,200 ppm)
• Bio-resistant without use of biocides, DCHA, or secondary amines
• Low maintenance requirements
• Excellent protection from staining on aluminum and ferrous alloys
• Improved tramp oil rejection designed for extended fluid life and recycling
• Low oil misting
EQUIPMENT
The Chemetall Americas Refractometer (0-30 Brix) can be used to measure the refractive index (Brix) of this product/solution. Water driven proportioners can be used to automatically feed the premixed solution of this product to the sumps. The Coolant Filter System can be used to filter out sludge, and oils from the metalworking fluids and help control any microbial growth in the sump. Please contact us directly for Process Equipment and engineering specific recommendations.
REGULATORY APPROVALS
Tech Cool 35052 meets the requirements of BAC 5008, Section 12.1 Weight Change Corrosion Testing and Section 12.5 Titanium Corrosion Testing. Tech Cool 35052 achieved Boeing approval for use on Titanium, Inconel and other high-nickel alloys after extensive onsite testing.
SHELF LIFE
24 month shelf life from date of manufacture in unopened original container when stored at ambient temperatures.
SAFETY AND HANDLING
Prior to handling and use of any of the materials referenced in this document, the Material Safety Data Sheets should be read and understood by all personnel in contact with these materials. Eyes and skin should be protected with appropriate personal protective equipment. Do not ingest. Eyewash fountains and emergency showers are recommended.
KEEP OUT OF REACH OF CHILDREN
STORAGE
Dry indoor storage at temperatures between 40ºF and 100ºF is recommended, away from any incompatible materials referenced in the Material Safety Data Sheets.
All containers should be tightly closed when not in use.
DISPOSAL
Any disposal of the materials referenced in this document should be in accordance with all applicable federal, state, and local regulations. The process solution can contain components other than those present in the materials as supplied. Analysis of process solutions may be required prior to disposal.
SUGGESTION OF OTHER PRODUCTS YOUR COMPANY MAY USE
•CLEANERS
•ETCHANTS
•DEOXIDIZERS
•RUST PREVENTIVES
•METALWORKING FLUIDS (coolants and lubricants)
•WASTE WATER TREATMENT CHEMICALS
•FLOOR CLEANERS AND MAINTENANCE PRODUCTS
•PROCESS EQUIPMENT/CONTROL SYSTEMS
DISTRIBUTED BY NALTIC INDUSTRIALS AN AUTHORIZED DISTRIBUTOR FOR THE USA
Chemetall US, Inc. ("Chemetall") warrants that products described within its official technical papers will conform with its published specifications. The products supplied by Chemetall and information related to them are
intended for use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Chemetall materials for their own
purpose. Since buyer's conditions of use of products are beyond Chemetall's control, Chemetall does not warrant any recommendations and information for the use of such products.
CHEMETALL
DISCLAIMS ALL OTHER WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS
PRODUCTS.
Please
contact us directly for a complete and official Chemetall Technical Data Sheet and/or MSDS in PDF.
